1 copyright ? 2010, everlight americas inc. all rights reserved. release date : 13 - apr - 2009 . issue no: 1 www.everlight americas .com smd ? b EAST2012GA0 features ? package in 8mm tape on 7 diameter reel. ? compatible with automatic placement equipment. ? compatible with infrared and vapor phase reflow solder process. ? mono - color type. ? pb - free . ? the product itself will remain within rohs compliant version. ? compliance with eu reach ? compliance halogen free .(br <900 ppm ,cl <900 ppm , br+cl < 1500 ppm). description ? the smd led is much smaller than lead frame type components, thus enable smaller board i ze, higher packing density, reduced storage space and finally smaller equipment to be obtained. ? besides, lightweight makes them ideal for miniature applications. etc. applications ? telecommunication: indicator and backlighting in telephone and fax. ? flat backlight for lcd, switch and symbol. ? general use.
datasheet smd ? b EAST2012GA0 2 copyright ? 2010, everlight americas inc. all rights reserved. release date : 13 - apr - 2009 . issue no: 1 www.everlight americas .com device selection guide chip materials emitted color resin color algai n p brilliant yellow green water clear absolute maximum ratings (ta=25 ) parameter symbol rating unit reverse voltage v r 5 v forward current i f 2 5 ma peak forward current (duty 1/10 @1khz) i fp 60 ma power dissipation pd 60 mw operating temperature t opr - 40 ~ +85 storage temperature tstg - 40 ~ + 90 electrostatic discharge esd hbm 2000 v soldering temperature t sol reflow soldering : 260 for 1 0 sec. hand soldering : 350 for 3 sec. electro - optical characteristics (ta=25 ) parameter symbol min. typ. max. unit condition luminous intensity iv 28.5 ----- 57.0 mcd i f = 20 ma viewing angle 2 1/2 ----- 140 ----- deg peak wavelength p ----- 575 ----- nm dominant wavelength d 56 9 .5 ----- 57 7 .5 nm spectrum radiation bandwidth ----- 20 ----- nm forward voltage v f 1.75 ----- 2.35 v reverse current i r ----- ----- 10 a v r =5v note: 1. tolerance of luminous intensity: 11% 2 . to lerance of dominant wavelength : 1nm 3.t olerance of forward voltage 0.1v
datasheet smd ? b EAST2012GA0 3 copyright ? 2010, everlight americas inc. all rights reserved. release date : 13 - apr - 2009 . issue no: 1 www.everlight americas .com bin range of luminous intensity bin code min. max. unit condition n1 28.5 36.0 mcd i f = 20 ma n2 36.0 45.0 p1 45.0 57.0 note: tolerance of luminous intensity: 11% bin range of dominant wavelength bin code min. max. unit condition c1 6 56 9 .5 5 71 .5 nm i f = 20 ma c1 7 5 71 .5 573 .5 c1 8 57 3 .5 57 5 .5 c1 9 57 5 .5 57 7 .5 notes: to lerance of dominant wavelength : 1nm bin range of forward voltage bin code min. max. unit condition 0 1.75 1.95 v i f = 20 ma 1 1.95 2.15 2 2.15 2.35 note: tolerance of forward voltage 0. 1 v
datasheet smd ? b EAST2012GA0 4 copyright ? 2010, everlight americas inc. all rights reserved. release date : 13 - apr - 2009 . issue no: 1 www.everlight americas .com typical electro - optical characteristics curves
datasheet smd ? b EAST2012GA0 5 copyright ? 2010, everlight americas inc. all rights reserved. release date : 13 - apr - 2009 . issue no: 1 www.everlight americas .com package dimension note: tolerances unless mentioned 0.1mm. unit = mm
datasheet smd ? b EAST2012GA0 6 copyright ? 2010, everlight americas inc. all rights reserved. release date : 13 - apr - 2009 . issue no: 1 www.everlight americas .com moisture resistant packing materials label explanation ? cpn: customer s product number ? p/n: product number ? qty: packing quantity ? cat: luminous intensity rank ? hue: chromaticity coordinates & dom. wavelength rank ? ref: forward voltage rank ? lot no: lot number reel dimensions note: the tolerances unless mentioned is 0.1mm ,unit = mm
datasheet smd ? b EAST2012GA0 7 copyright ? 2010, everlight americas inc. all rights reserved. release date : 13 - apr - 2009 . issue no: 1 www.everlight americas .com carrier tape dimensions: loaded quantity 3 000 pcs per reel note: the tolerances unless mentioned is 0.1mm ,unit = mm moisture resistant packaging label desiccant label aluminum moisture-proof bag
datasheet smd ? b EAST2012GA0 8 copyright ? 2010, everlight americas inc. all rights reserved. release date : 13 - apr - 2009 . issue no: 1 www.everlight americas .com precautions for use 1. over - current - proof customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( burn out will happen ). 2. storage 2.1 do not open moisture proof bag before the products are ready to use. 2.2 before opening the package: the le ds should be kept at 30 or less and 90%rh or less. 2.3 the leds should be used within 168 hours (7days) after opening the package . if unused leds remain, it should be stored in moisture proof packages. 2. 4 if the moisture absorbent material (silica gel) has faded away or the leds have exceeded the storage time, baking treatment should be performed using the following conditions. baking treatment : 60 5 for 24 hours. 3. soldering condition 3.1 pb - free solder temperature profile 3.2 reflow soldering should not be done more than two times. 3.3 when soldering, do not put stress on the leds during heating. 3.4 after soldering, do not warp the circuit board. 4.soldering iron each terminal is to go to the tip of soldering iron temperature less than 35 0 for 3 seconds within once in less than the soldering iron capacity 25w. leave two seconds and more intervals, and do soldering of each terminal. be careful because the damag e of the product is often started at the time of the hand solder. 5.repairing repair should not be done after the leds have been soldered. when repairing is unavoidable, a double - head soldering iron should be used (as below figure). it should be c onfirmed beforehand whether the characteristics of the leds will or will not be damaged by repairing. pre-heating 150~200 c 60~120sec. above 217 c 60~150sec. 260 c max. 10sec. max. 6 c/sec.max. above255 c 30sec.max. 3 c/sec.max.
datasheet smd ? b EAST2012GA0 9 copyright ? 2010, everlight americas inc. all rights reserved. release date : 13 - apr - 2009 . issue no: 1 www.everlight americas .com application restrictions high reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. if you have any concerns, please contact everlight americas before using this product in your application. this specification guarantees the quality and performance of the product as an individ ual component. do not use this product beyond the specification described in this document.
|
